• Transfer Type Molding Machine
• Plate Vulcanizing Press
• Vacuum Vulcanizing Press
• Rubber Injection Molding Machine
• Transfer Type Molding Machine For Thermoset Plastic
• Rubber Mould
• Rubber Products

• Proportional valves
• Pressure control valves
• Directional control valves
• Flow control valves
• Cartridge valves
• Sandwich valves
• Screw-in cartridge valves
• Explosion isolation valves
• Internal gear pumps
• Hydraulic assembly
• Hydraulic motors
• Solenoids
• Manifolds
• Proportional amplifier

• Plastic Injection Molding Machine
• Servo Energy-Saving Two-Platen Four-Cylinder Hydraulic Injection Molding Machine
• Two-color Injection Molding Machine

A press, or a machine press is a tool used to work metal (typically steel) by changing its shape and internal structure.

A forge press reforms the work piece into a three dimensional object—not only changing its visible shape but also the internal structure of the material. A stronger part results from this process than if the object was machined.

Bending is a typical operation performed and occurs by a machine pressing, or applying direct pressure, to the material and forcing it to change shape. A press brake is a typical machine for this operation.

An easy to understand type of machine press is a set of rollers. Metal is fed into the rollers, which are turning to pull the material through. The space between the rollers is smaller than the unfinished metal, and thus the metal is made thinner and/or wider.

Another kind of press is a set of plates with a relief, or depth-based design, in them. The metal is placed between the plates, and the plates are pressed up against each other, deforming the metal in the desired fashion. This may be coining or embossing or forming. A punch press is used for forming holes. Capping Presses form caps from rolls of aluminium foil at up to 660 per minute.

Progressive stamping is a manufacturing method that can encompass punching, coining, bending and several ways of modifying the metal, combined with an automatic feeding system. The feeding system pushes a coil of metal through all of the stations of a progressive stamping die. Each station performs one or more operations until a finished part is made per the requirements on the print. The final operation is a cut-off operation, which separates the finished part from the carrying web. The carrying web, along with metal that is punched away in previous operations, is considered scrap metal.

A brake press is a special type of machine press that bends sheet metal into shape.