- Transfer Type Molding Machine
- Plate Vulcanizing Press
- Vacuum Vulcanizing Press
- Rubber Injection Molding Machine
- Transfer Type Molding Machine For Thermoset Plastic
- Rubber Mould
- Rubber Products
- Rubber machinery,
- hydraulic valve
- Plastic
Rubber Vulcanizing Plate Vulcanizing Press
Plate Vulcanizing Press For Rubber
Technical Data Table for MODEL:LWL-D500x500/1000KN NO:100T
|
PARAMETER |
| CLAMPING FORCE 1000KN |
| SYSTEM PRESSURE 21MPa |
| CLAMPING STROKE 300mm |
| FAST CLAMPING SPEED ≥60mm/s |
| HEATER PLATEN SIZE 500×500mm2 |
| HEATER PLATEN DISTANCE 350~600mm |
| MAX TEMP 250 |
| EJECTOR STROKE 250mm |
| MOTOR POWER 5.5kw |
| HEATER POWER 10.4kw×2 |
| EJECTOR TONNAGE 60KN |
| OIL TANK CAPACITY 400L |
this machine is able to make rubber model products and non-model products as well as products of thermoplast,foam,resin,bakelite material.
Plate Vulcanizing Press, Rubber Plate Press, Compression Press
Product characteristics
1.Computer-optimized structure design, three-beam and four-column structure, which is easy,economic, and practical
2.Hydraulic system accelerated via prefilling, auxiliary cylinder ascending and descending with reliable and accurate motion as well as low hydraulic impact for a longer life
3.Button-type foot electrical control or manual control both applicable
4.Computer programming, fullly automatic cycling and delayed holding pressure realizable
5.100mm/s for idle stroke and 12mm/s for pressurization
6.Customized table size, stroke and tonnage
7.Equipped with holding cylinder above and below
Main technical parameters
| Type |
GHY-400T |
Cylinder stroke (mm) |
300 |
|
Clamping forceT |
400 |
Total power (KW) |
12.5 |
|
Working hydraulic pressure (Mpa) |
20 |
Weight(T) |
7.48 |
|
Table size (mm) |
700*700 |
Overall dimensions(mm) |
2500*1300*3000 |
|
Cylinder diameter |
500 |
|
|
